The plan against Renata Golask was just an unexpected event.

Li Lin's visit to Hilco this time was mainly to inquire about the construction of the arsenal and the matter of the Alchemist Baron.

In fact, Hilco had long been dissatisfied with several alchemy barons who had ulterior motives.

Baron Middenstock was one of them, and Raymond Keane was also on his list of targets.

Li Lin used the incident in the mental hospital to have the law enforcement officer arrest Raymond Keane, which was in line with Silko's idea.

However, Hilco still has thoughts about the forces at his disposal, such as the alchemy workshop, factories and mines.

But if Li Lin did this, Raymond Keen's property would be confiscated by the Piltover police and then divided up among several families.

Hilko felt a little resentful, but he couldn't say it out loud.

In fact, the arsenal was built not long after Li Lin set out for Shurima, and the materials on the list he had written earlier were also ready.

Because Li Lin had been away for the past six months, Hilco had his men seal up all the things for the time being to prevent them from being corroded and rusted by the harsh environment of Zaun.

Coincidentally, the site chosen by Silko for the arsenal was not far from the Oswald Asylum, but it was more remote, located in the "suburbs", and few people would go there on weekdays.

This is in line with Li Lin's idea.

By the way, he also wanted to acquire and renovate the old canning factory on the edge of Black Alley Pier where Hilco had previously hidden to produce the Shimmer Potion, and the abandoned Welsh Brewery where he rescued the Gilaman couple.

A total of four large-scale factory sites are available, three for production and one for assembling parts.

At present, the arsenal is mainly focused on intelligent mechanical engineering troops, while the air combat machinery Storm is secretly assembled and produced.

Thanks to the relationship with the Gilaman family, as long as the Gray Lady is not alerted, the law enforcement officers generally will not make things difficult for themselves by searching the property of the senator's family.

However, in addition to modular assembly production, the supply of large quantities of smart chips is also a problem.

In this regard, Li Lin plans to return to Piltover to discuss with Lady Karina and reach a cooperation with Piltover University to establish a smart chip production line based on the original auxiliary chip production.

If possible, he might also be able to cooperate with Alchemist Baron Lannar, who has cooperated with many major families in Piltover and specializes in the robot manufacturing industry.

As for the transportation management of these factories in addition to the intelligent production lines, Li Lin plans to let Mondo do it first.

Of course, his current level of knowledge is too limited and still needs training.

Li Lin wrote a new list of materials for Hilco and decided to go to the arsenal in the lower city of the middle square to check it out first.

They called Mondo, who was dozing off and snoring on the bench outside the door, and the two of them got on the transport plane and went down to the middle square again.

After another nearly half an hour's journey, Li Lin and Mondo arrived outside the completed arsenal under the guidance of one of Hilco's confidants.

The factory covers a large area, much larger than Oswald, and is about the same size as the previous Welsh Brewery.

Since it was not registered with the Piltover Police, Li Lin could not do so, so there was no modification to its appearance.

At first glance, this arsenal looks like an abandoned old factory, just like many of the bankrupt factories in Zaun. It is unremarkable.

However, when Li Lin used his key to open the factory door, the environment inside suddenly changed.

The inside of the factory is very clean, and it seems that Hilco often sends people to clean it.

The basic mechanical production equipment has been built and is all covered with special plastic sheets to prevent corrosion.

There were also more than twenty large locked metal boxes locked in a closed room similar to a warehouse, which contained the materials Li Lin needed half a year ago, which were no less than what he recorded in his list.

Mondo walked around the arsenal and returned to Li Lin, who was checking mechanical parts, and was very curious.

"Boss, are you going to open a factory?"

He stretched his head to look at the mechanical parts in the box, a smile on his face. "Before I became Baron Raymond Keane's thug, I was a workshop supervisor in a watch parts processing factory. I think I can help."

"Oh?" Li Lin glanced back at Mondo in surprise. "Isn't factory supervisor a good job? Why did you end up working for Raymond Keane?"

Mondo scratched his head and laughed awkwardly, "That factory closed down..."

Uh...that's okay.

Li Lin picked up two boxes of parts and stood up, asking Mondo to also hold a box and follow him to one of the production line machines.

Although this mechanical device still needs to be upgraded to be intelligent, its basic operation still needs to be tested first.

After quickly arranging some materials, Li Lin pulled the device switch and asked Mondo to go to the end of the conveyor belt and get the produced parts.

With a harsh sound of metal friction, the machine began to run slowly.

More than ten minutes later, Mondo ran over, holding one of the Storm Robot's internal parts in his hand. "Boss! This machine looks fine."

After taking the parts, Li Lin started to use his "data thinking" to take a look.

Poor quality, not a qualified product, but at least it can be used normally.

He threw the parts aside and looked up to meet the eyes of the burly man who was more than a head taller than him. "Mundo, I have a mission for you."

Mondo immediately stood at attention solemnly, "Please tell me, I will do my best to complete it!"

"When a new batch of materials arrives in a few days, I'll upgrade all the machines in the factory, and you'll be responsible for its normal operation."

This chapter is not finished yet, please click on the next page to continue reading the exciting content!