The steel mill hired an expert to upgrade its equipment, as the current equipment was inefficient.

These are all equipment that have been eliminated by other countries.

After research, the principle of the device has been figured out.

A lot of drawings were also drawn, with all kinds of data included.

It is difficult to produce these devices now, but it is still possible to upgrade the equipment.

If these devices are upgraded, production efficiency will increase by 40 percent.

This is a very significant breakthrough.

Everyone takes this matter very seriously.

Sha Zhu’s small kitchen also specializes in cooking for experts.

An old piece of equipment has been dismantled to produce new parts.

The steel plant has no shortage of people to produce parts, and they can make these parts themselves.

Once all the parts are produced, they can be assembled.

Whether it can succeed depends on this time.

Theoretically it has been simulated countless times, but the real practice has just begun.

Only when the actual test is passed can it be considered a success.

To this end, the factory formed a special team led by experts to study this matter specifically.

In addition to the experts, the team consists of five other people.

Two people are responsible for drawing graphs and recording various data.

There are two others who are responsible for producing parts. The experts are very familiar with the equipment, but they fail when it comes to producing parts.

This still needs to be done by professionals. The requirements for these parts are very high and there cannot be any errors.

Experts cannot produce such precise parts.

There is another one who is responsible for doing odd jobs. He is the one who does all the work.

This group has been working on it for several days and is about to produce results.

Now, the parts have been produced and it is time to assemble them, and this is when the experts assemble them themselves.

Any problems can be discovered in time, and whether each part is suitable requires experts to grasp.

At this time, every link must be handled with caution, as a slight mistake may lead to overall failure.

At this point, the experts were still very nervous.

Fortunately, the experts have rich experience and have considered every aspect.

There were no mistakes in the installation.

Once it's assembled, the next step is to start testing.

Let the recorder record the data, this will be needed.

The experts asked people to start the machine and operate it. After testing, the work efficiency was greatly improved, by 50%.

The qualification rate of produced parts has also been improved. Some of the parts produced previously still needed manual trimming, but now the parts produced do not need any processing at all.

What is produced is qualified products with higher precision.

Seeing this result, the experts breathed a sigh of relief.

Finally succeeded.

Ask someone to invite the factory manager. This matter needs to be reported to him.

Next, you can upgrade the machines in large quantities.

Once all of this batch of machines are upgraded, work efficiency can be greatly improved and more parts can be produced.

This is a very good thing.

It is very important to the entire Chang Steel Plant.

When Director Yang heard that the equipment upgrade was successful, he was very happy and ran over directly.

The expert told the factory manager the test results and had someone do it again.

Without direct viewing, the factory manager had no idea at all. Only after actually seeing it did he know that it was truly successful.

Director Yang was very happy after seeing it.

Organize a meeting to discuss what to do next.

Upgrading all the equipment is not an easy task.

We need to make reasonable plans and set up a sequence of priorities to determine which workshop should be upgraded first.

The production of parts requires more people.

It would be impossible to handle so many parts with just two people.

These all need to be discussed and arranged.

Director Yang asked the experts to check the machine again to make sure there were no problems.

Director Yang needs to report to his superiors.

Such a big thing must be made known to the leader.

After hard work, I finally succeeded.

Director Yang went back to attend the meeting.

The expert checked the equipment again to see if there was any wear on the machine parts.

See if there is any area that needs improvement.

During this period, Sha Zhu's life was still very happy, and he received special treatment from the experts.

He ate a lot of good food.

You should try it and see how it tastes.

Using this excuse, Sha Zhu ate a lot of good food.

You just can’t bring any vegetables with you, otherwise Sha Zhu would have taken them away.

If you try it, no one will say anything, but if you take it away, others may not be happy about it.

There are so many people in the kitchen, and Shazhu is not popular.

If he takes the vegetables away, someone will definitely report him.

Shazhu was punished last time.

Several months’ salary was deducted directly.

Director Yang reported the matter to his superiors.

The leader said he would come to visit tomorrow.

Director Yang knew that his boss liked Sichuan cuisine, so he asked Sha Zhu to cook a table of Sichuan cuisine.

The next day the leader came to visit.

I went directly to the workshop to check the working efficiency of the machines.

After testing, all the data have been greatly improved, which is very good.

With this improvement, more parts can be produced.

The leader praised everyone.

We had lunch together at noon, and the leader had Sichuan cuisine, which was very good.

He also made a special trip to meet with Sha Zhu.

This leader should be the person who helped Shazhu the most.

Next is the issue of equipment upgrades.

This chapter is not finished yet, please click on the next page to continue reading the exciting content!