Miyu Tomikawa quickly found out the situation and said to Miyuki Kinzatsu, "Senior Miyuki Kinzatsu, I asked around and found out that Tiangong Technology Company is also selling CNC machine tools, and the price is very cheap. A CNC boring machine is more than 100,000 US dollars cheaper than our CNC boring machine!"

"What?!" Kim Sam-suk exclaimed in astonishment.

"Oh, by the way, Tiangong Technology Company is also a subsidiary of Wujiang Group!" Tomikawa Miyu added.

Upon hearing this, Kim Sam-jin was surprised once again.

"You stay here and keep watch, I'm going to check things out at Tiangong Technology!" Jin Sanjin stood up. He had a bad feeling that Yamazaki Mazak was going to suffer a major setback at the Canton Fair in China...

Before long, Kim Sam-jin arrived at the exhibition area of ​​Tiangong Technology Company. Wow, it was packed with people and incredibly lively.

A crowd gathered in front of more than ten CNC machine tools.

After observing for about ten minutes, Jin Sanjinyou saw many people signing contracts with Tiangong Technology.

The more Kim Sam-jin looked, the more panicked he became. This business was so good, all the customers were being attracted here, no wonder no one was buying his company's products.

After listening to the staff's introduction of Tiangong Technology's low-end CNC machine tools, Jin Sanjinyou knew that these machine tools were in no way inferior to those of Yamazaki Mazak.

However, Tiangong Technology's low-end CNC machine tools are very cheap, which is something Yamazaki Mazak cannot match, unless Yamazaki Mazak is willing to move its factory to China.

Japan has a small land area and scarce resources, so many raw materials have to be imported from abroad. Moreover, Japanese wages are very high, which results in the production cost of Yamazaki Mazak CNC machine tools being much higher than that of Tiangong Technology's CNC machine tools.

Jin Sanjin felt somewhat powerless. Tiangong Technology's price advantage was too strong, making Yamazaki Mazak's low-end CNC machine tools uncompetitive.

"Baka yarou! Any product that Chinese people can manufacture will be sold at rock-bottom prices!"

Jin Sanjin was seething with hatred, mentally cursing the general manager of Tiangong Technology Company countless times, and even cursing Wujiang Group and Zhao Ye...

Half an hour later, Kim Sam-soo returned to the Yamazaki Mazak booth looking dejected.

"Senior Kinmitsu, how's your investigation going?" Miyu Tomikawa asked.

"Ugh, don't even mention it, it was absolutely terrible!" Kim Sam-jin shook his head and sighed. "Our purpose in attending the Canton Fair can be declared a failure in advance..."

Then, he gave Miyu Tomikawa a detailed introduction to the situation at Tiangong Technology.

After hearing this, a layer of sorrow settled over Tomikawa Miyu's beautiful face.

Zhou Huicheng, general manager of Tiangong Technology, was so excited that he could hardly contain himself. On the first day of the Canton Fair, Tiangong Technology signed orders from 46 factories, with sales reaching US$225 million!

In addition, Tiangong Technology's low-end CNC machine tools also gained a reputation at the Canton Fair, attracting the attention of many domestic and foreign companies.

On this day, the Japanese team failed to acquire any low-end machine tools, making their trip a complete waste.

Japan cannot sell high-end machine tools to China, and it cannot compete with Tiangong Technology in the low-end machine tool market, which is an awkward situation.

Moreover, an even greater crisis is on the horizon.

Japan will gradually lose market share in the low-end CNC machine tool market in the international market, and will be powerless to resist when faced with Tiangong Technology's bloody price war in the low-end CNC machine tool market.

...

With Tiangong Technology's debut at the Canton Fair, people discovered that Tiangong Technology, a subsidiary of Wujiang Group, was also quite impressive, attracting widespread coverage from domestic media.

Furthermore, foreign media outlets have also reported on Tiangong Technology. For example, one Japanese media outlet stated, "Tiangong Technology is a killer of low-end CNC machine tools in the international market!!!"

This statement clearly reflects that Japanese low-end CNC machine tools cannot compete with Tiangong Technology in the international market.

Tiangong Technology, which had been relatively unknown until now, has become famous overseas.

As people gained a deeper understanding of Tiangong Technology, they soon discovered that the company was even more impressive than they had imagined, boasting over four thousand engineers and possessing formidable strength in the field of precision machining.

Furthermore, even the world-renowned optical giant East Zeiss is a subsidiary of Tiangong Technology Co., Ltd.

Seeing this, many people were shocked and concluded that Tiangong Technology will definitely become a precision machining giant in China in the future!

"Tiangong Technology is so amazing! Our factory should buy machine tools from Tiangong Technology!"

"Support domestic products! Japanese machine tools have terrible service and are too expensive. Tiangong Technology's machine tools are much better!"

"I read in the newspaper that Tiangong Technology is so amazing. Let's go to Tiangong Technology Company to check it out. If their product quality is good, then we'll just buy from Tiangong Technology."

"..."

As Tiangong Technology's reputation grows, its business volume also increases.

It's important to know that there are a large number of factories in China. In the past, it was not easy for factories to purchase low-end CNC machine tools, either because they were too expensive or because there were no purchasing channels. However, with the rise of Tiangong Technology, factory owners have come to realize that there is a company in China that produces low-end CNC machine tools at very low prices.

For a time, factory owners flocked to Tiangong Technology Company to purchase low-end CNC machine tools.

Today, although Tiangong Technology can only produce low-end CNC machine tools, it can still drive the rapid development of the domestic manufacturing industry.

As the saying goes, "Quantitative change leads to qualitative change."

China's domestic manufacturing level is obviously much higher than in the previous life, and China is not far from becoming the world's factory.

This chapter is not finished yet. Please click on the next page to continue reading the exciting content!