Chapter 259 Mechanical Arm and Magic Drawing Pen

Take the initiative!?

Bruno's words undoubtedly made everyone present tremble.

Because before this, passive defense was the strategy that the Idar Lords had always adhered to.

Although the Admiral Mal Karen had shouted countless times that the idle naval soldiers should take the initiative to attack and blow up the Odin people as soon as possible, all these were put on hold by Bruno.

But……

Seeing the tremendous power displayed by the Persuader I submachine gun, everyone present had an idea that they had perhaps never considered before: take the initiative and attack!

yes!

Since the Persuader I submachine gun is so powerful and so cheap, and will be equipped to all Idar soldiers in the near future, why can't Idar's army, equipped with this equipment, take the initiative to attack and drive those vicious Odin cavalry back to the north?

For a moment, everyone's hearts were burning with excitement.

"The Idar Army will obey the Earl's orders and will fight to the death! As long as the magic rifles can be put into service as soon as possible, the Idar Army will surely blow the Odin people's heads off!" Sam Layton said in a deep voice.

"The navy too!" added Mal Karen.

…

The New Year has passed and spring is approaching.

As the spring ploughing season draws closer, the atmosphere in Idar Territory gradually becomes tense.

but……

This kind of nervousness is not the panic of a poor student who has wasted his time when facing the final exam. Rather, it is like a top student who has been on the "battlefield" for a long time and is thinking about how to impress others while feeling nervous.

Idar Territory is not the Lays potato chips that look very inflated but are actually weak, but rather the compressed biscuits that look insignificant but are actually full of dry goods.

Especially when the street lamps beside Idar Avenue emitted a soft yellowish halo under the impetus of magic, the Idar people's confidence in defending their homeland was completely ignited! Ever since the Persuader I submachine gun demonstrated its power, taking the initiative to attack has become a consensus reached by the Idar people.

after all……

It would be a bit of a waste to use this long-range weapon, which looks extremely powerful at first glance, to defend the city.

Glen Heights.

On one side of the Idar Steel Plant, the Idar Arms Factory, which was built by Bruno himself, has been fully put into production and operation.

Old Ford rearranged the workers' division of labor and work and rest schedules, allowing workers in the factory to work in three shifts within a twenty-four-hour period, allowing the production of the Persuader I submachine gun to continue at any time.

However, as the term "magic industrialization" gradually becomes a reality in Idar Territory, perhaps the production of some precision parts is still not satisfactory, but...magic machinery driven by magic has taken on most of the processes in the factory.

The core technology of the magic rifle lies in the part at the back of the gun that gathers a large number of magical structures, and the production process of this part is almost entirely completed by magic machinery.

Using the knowledge they had learned during these days, the mage apprentices designed a mechanical arm that could repeat the same movements and routes over and over again.

In actual applications, this magic-driven robotic arm plays the role of "mage apprentice".

The magic power transmitted to the robotic arm through wires is divided into two parts. The vast majority of the magic power is "put" into the power structure at the bottom of the arm to maintain the normal operation of the robotic arm.

The other part of the magic power is transmitted through the magic crystal slabs and various magic arrays painted on the mechanical arm. After the steps of "classification" and "purification", the selected magic power is gathered in the wand-like structure at the tip of the mechanical arm.

What do mages use to cast spells?

The answer is the staff.

The original intention of designing the staff is to enable the caster to cast magic faster by selecting suitable magic-friendly materials while catering to the wizard's feel.

However……

When the Idar School gradually regarded the drawing of magic circles as its main research object, the original staff gradually became a useless thing.

Because for the Idar School, it is really difficult to use a staff that is often forty or fifty centimeters long to draw a precise magic circle that is only a few centimeters in size.

Therefore, as early as when the research on magic circles just began, Bruno improved the staff and designed a drawing tool that was more in line with the development ideas of the Idar School.

The shortened staff would not be longer than eighteen centimeters. Through the inlaying of magic crystals and the arrangement of source stones, it formed a "magic drawing pen" that was no less effective than an ordinary staff.

The appearance and structure of the magic drawing pen are similar to the pencil in the previous life. The pen shaft is made of the same magic-friendly wood as the staff, but the tip of the magic drawing pen is made of polished magic crystal stone, which makes it easier to draw magic circles.

The robotic arm manufactured by Idar also retains this feature.

The latest novel is published first on Liu9shuba!

At the same time, in order to ensure the service life of the robotic arm as long as possible and obtain maximum benefits, the most advanced structure of the robotic arm can be replaced at any time, which greatly extends the service life of the robotic arm.

However... in the process of using mechanical labor to replace human production, there will definitely be considerable obstacles, and this mechanical arm driven by magic to draw magic circles does not have all advantages.

After all, this was just a beginning. Therefore, in order to ensure the stability and accuracy of the mechanical arm when drawing magic arrays and splicing magic crystal slabs, the mages of the Idar School had to sacrifice the drawing speed of the mechanical arm, so that it could achieve the mechanized production of the core structure of the magic rifle at an extremely slow speed according to the original pre-set route.

The speed of this mechanical arm in drawing magic circles is even slower than that of the most inexperienced mage apprentice, but the thing is... as long as it has a sufficient supply of magic power, this magical machine can tirelessly draw one core component after another.

This is beyond the reach of mere human power!

Especially in Idar Territory, where the number of mages is extremely limited, even with the wonder bonus brought by the Great Lighthouse, the number of mages and mage apprentices in Idar Territory is only forty or fifty.

Although this number is already large, it is far from enough if these mages are to be used as labor.

Although a large number of robotic arms have a slow production speed, they can achieve large-scale production of core components by virtue of their quantity advantage.

As for the workers in Idar County, what they need to do is to assemble the scattered parts one by one and piece them together into a complete Persuader I submachine gun!

Such a production process not only greatly improves efficiency, but also ensures to a large extent that the manufacturing method of the core structure is not leaked.

While the Persuader I submachine guns were being produced and gradually put into service, the managers of Idar County were not idle either. The battle ideas, attack methods, expected targets... these were all issues that Bruno and his officials and generals at all levels needed to consider.

and……

Although taking the initiative to attack may sound like just a change in combat strategy, in fact, it will involve all aspects of Idar Territory, such as...

Before the war started, Bruno planned to make a newspaper.

(End of this chapter)