"Alas! I told you not to get involved in Zhang Holdings, but you didn't listen."
"Now is not the time to talk about this."
"Can we talk to Technology No. 9? Then they can attack me, but we can't attack them. We will be exhausted sooner or later."
"..." Zhang Handong shook his head.
"This is just your guess. If it's just the positive side, No. 9 Technology may not necessarily win."
"Don't forget that we still have teammates." The fat old man said unconvinced.
"Mr. Guo, do you mean to wait and see what No. 9 Technology comes up with before making any decisions?"
"Yes, there's no point in being anxious now. Let's wait and see the situation before deciding what to do." The fat old man nodded.
"Okay, I agree with Mr. Guo."
"Then let's do this for now."
“…”
"Is this what everyone means?" Zhang Handong asked after looking around.
“…”
"Since everyone agrees, let's follow Mr. Guo's advice and observe for a while to see what No. 9 Technology will do next, and then consider how to respond."
......
Turn your attention back to Technology No. 9.
The prism's pivot would have to wait, so Liu Chi decided to take this time to look at the design system.
Last time, Ed sent me those huge accessories for the automatic design system, so I had just enough time to study this automatic design system.
The most important thing about the automatic design system is the machine tool accuracy and the movable humanoid robot.
The machine tool is ready.
The intelligent design system is also done.
That leaves robots.
Liu Chi browsed on the computer for a while and found the design drawings of the robot.
In today's industrial system, robots are usually fixed in place or moved on tracks.
The robot in this automatic design system is more advanced and has more mature technology than industrial robots. Of course, it is also more difficult to operate and its movement trajectory is completely similar to that of human beings.
The entire robot is only 1.05 meters tall and can perfectly simulate the movements of human hands. When the time comes, it will be absolutely safe when combined with the design system.
Brand-new intelligent mechanical technology, eight-level industrial waterproof standard, and dynamic encrypted remote connection.
36-node rotation technology, free balancing movement technology, humanoid dynamic system, etc., any one of them is an amazing technology.
It can independently replace manual operation steps, and the innovative high-precision grasping sensing technology can position the grasping accuracy to 0.001 mm.
Anti-fogging camera......
Voltage detection device......
Automatic return device......
Automatic identification technology......
Automatic rework technology......
......
It is:
Top industrial technology.
The ends of its two robotic arms have human finger structures and joint grasping technology, and the two legs are the same. The total power system is controlled by a balance device, and the entire sensing system uses dynamic capture marker point technology.
The internal structure of this robot is complicated, and a large amount of lightweight and hard alloy materials are used to reduce weight and increase load-bearing capacity.
After all, we still have to move things when the time comes.
In terms of the transmission unit, the bulky electro-hydraulic drive system designed for cost-effectiveness in ordinary robots has also been abandoned.
It adopts a smaller volume, a new electro-hydraulic drive system, and improves the precision, making the electro-hydraulic transmission system.
This is true of all structures;
That can certainly save a lot of space, arrange auxiliary systems, and have a higher energy density;
There is a whole set of these in the system;
Dynamic trajectory;
Movement system,
It can already move completely along the trajectory of human limbs.
If the design information of this robot were to be exposed, the impact would probably be no worse than that of a heating device.
This technology is not suitable for public release right now, but it is fine to use it privately.
However, the cost is also skyrocketing, and it costs about 55 million to produce one.
This does not include the cost of R&D technology!
......
After get off work in the afternoon;
Liu Chi walked out of the office and looked at the scorching sun. The weather felt like being in a furnace.
It's already past five o'clock and the sun is still so bright. Are you kidding me?
......
Two days later, Wang Shan personally delivered a batch of bearing materials.
After getting the bearing materials, Liu Chi temporarily put aside the robot and decided to try to make a prism bearing first to see if it would work.
......
A week passed in a flash.
In the laboratory, Liu Chi and Zhou Meng sat around a table.
Liu Chi had been frowning for more than half an hour, and Zhou Meng was also in a daze, his eyes a little confused.
at last......
Liu Chi rubbed his aching temple, then reached out and picked up a hinge assembly on the table!
"Oh, where exactly is the problem? There's nothing wrong with the material, and there's nothing wrong with the precision. So why does it fail when assembled?" Liu Chi held up the cone assembly, looked at it again and again, and said hesitantly.
The materials also fully meet the technical and parameter requirements. After measurement, there are no problems inside and the sizes of the parts are absolutely OK.
How come it becomes an unqualified product once it is assembled?
What's the problem?
Is something strange?
"Let me see!" Zhou Meng looked at the bearing assembly in Liu Chi's hand, which was emitting a silver-white metallic glow. It had an almost perfect geometric shape, a smooth surface, and the glow emitted by the high-purity material.
Half an hour later.
Zhou Meng felt his hands were a little sore, so he put down the assembly and said to Liu Chi, "Brother Chi, did we miss something?"
This chapter is not finished yet, please click on the next page to continue reading the exciting content!
Continue read on readnovelmtl.com
