Chapter 341 We Don’t Have Much Time



"Do you know how to get there?" Liu Chi didn't bother about whether to go to the Great Wall or not, and changed the subject.

"Yes, it's written here." Zhou Meng zoomed in on his phone and said, "Get off the Beijing-Tibet Expressway (formerly Badaling Expressway) at Kangzhuang Exit."

Zhou Meng stopped, looked at his phone for a while, and then continued: "Follow the signs and drive along Kangzhang Road, turn left to Kangxi Road and go straight. You will reach Wild Duck Lake National Wetland Park in about 10 minutes."

“The whole journey is only about 80 kilometers.”

"That's very close. We'll be there in an hour and a half." Ye Yuxin said to Liu Chi, "How about we eat and rest a bit before setting off?"

"What do you think, girl?" Liu Chi had no objection and turned to ask Zhou Meng.

"Okay, okay!" Zhou Meng said happily.

"Then...we'll stay there for two nights?" Zhou Meng looked at Liu Chi expectantly;

After all, this matter needs Liu Chi's approval.

"Well, we have to come back the day after tomorrow night at the latest, because the day after tomorrow I have to process the parts of the mecha, and then debug the mecha." Liu Chi explained.

"Then come back the day after tomorrow night, three days and two nights." Zhou Meng was grunting like a pig at this time: "Then I'll book a room."

"Okay, you order it." Liu Chi nodded and said to Ye Yuxin, "Tell Chen Fei and ask him to prepare it."

"Okay!" Ye Yuxin picked up her phone, opened Chen Fei's WeChat, and started editing the message.

"......"

A base in the east;

"How is it, Old Feng? Is it debugged well? Can it reach 3UM?" An old man in a sky blue uniform and white hair walked into a workshop, looked at the assembled machining center, and asked Feng Jiangyun.

"It's still being debugged." Feng Jiangyun glanced back at the old man (Wang Gan), shook his head and said, "The accuracy is now 4UM, which is still a little short. We are still looking for problems."

"The assembly parts are ready and we're just waiting for you." Wang Gan said after turning around.

"Give me two hours." Feng Jiangyun said.

"Okay, then I'll let them do the preparations first." Wang Gan nodded, took a look at the big guy in front of him, and after making sure that Feng Jiangyun was okay, he left the workshop.

Two hours later.

"No problem, we can start processing." Feng Jiangyun put down the measuring tools in his hand, confirmed that the processed parts met the requirements, and turned to Wang Gan and said, "Are you ready?"

"Everything is ready. We're just waiting for you." Wang Gan said seriously.

"Okay... let's get started!" Feng Jiangyun said, adding, "Finish it sooner, as we still need to assemble it later."

"good!"

"Bring over assembly number one." Wang Gan waved to the technicians who had been waiting there.

"Let me enter the data first." Feng Jiangyun directly opened the control console of the machining center and inserted the USB flash drive that had been prepared earlier into the USB port.

Just as Feng Jiangyun was entering the data, seven or eight staff members used tools to push in an extra-large assembly of more than 60 square meters.

"Be careful, put it on the workbench." After Feng Jiangyun finished entering the data, he carefully directed the staff to put the assembly on the workbench.

"Move half a meter to the left."

"Stop, stop, stop. Move a little more."

"Back off ten centimeters."

"About 3 centimeters to the left."

"Wait... Let me adjust the drill bit and see."

“…”

"It's rotating three degrees."

"No, it's not enough. Turn it a little further."

"Almost there, let me try again."

"Move a little further to the left. There's not enough distance on the right."

"OK, no problem, fixed it."

“…”

After Feng Jiangyun fixed the parts and other components, he put on the glass cover, and after making sure everything was normal, he directly pressed the start button.

After Feng Jiangyun pressed the start button, a group of people;

Everyone stood outside the glass cover nervously and quietly, watching the drill bit spinning at high speed.

Time is like a comb;

It was an hour later when the drill stopped.

"Bring the measuring tools and measure directly on the workbench. If it doesn't work, make modifications." Feng Jiangyun said as he opened the glass cover.

"A1#2.1203MM;"

"A5#13.5801MM;"

"R56#35.8002MM;"

"R58#8.5001MM;"

"Y1#4.5801MM

"......"

"Passed!!!" More than half an hour later, under the expectant gaze of a group of people, Feng Jiangyun said these two words.

"yeah!!!"

"marvelous!"

"......" The crowd instantly huddled together.

After everyone calmed down, Feng Jiangyun said, "Okay, be quiet, go and bring over part No. 2. We don't have much time, and we still need to assemble and debug it later."

"Yes, let's go, let's get accessory number 2."

"Lao Li, go push number 3."

"Then I'll go to number 4, and members of group C, follow me."

"......"

His gaze returned to Liu Chi.

Liu Chi sat in the living room for half an hour, but didn't see Zhou Meng and Ye Yuxin come out of the room. He stood up helplessly and walked to her room. Seeing that the door was not closed, he walked over and saw Ye Yuxin was still helping her fold clothes.

"Are you ready girl? The sun is about to set."

"How can it be that fast?" Zhou Meng raised his head and said, "It will be ready soon!"

"Girl, I've been waiting for half an hour. It's only two days. Is it that difficult?" Liu Chi walked into the room and said helplessly, "Just bring two sets of clothes and some daily necessities. Is it necessary to make it so complicated?"

This chapter is not finished yet, please click on the next page to continue reading the exciting content!

Continue read on readnovelmtl.com


Recommendation



Comments

Please login to comment

Support Us

Donate to disable ads.

Buy Me a Coffee at ko-fi.com
Chapter List