Wu Changfeng was originally supposed to attend the morning meeting in the production workshop.
But it is now 10 a.m.
Willow branches were used to direct the workers who were making electric toothbrushes to begin their work.
The others cleaned up the new air fryer production line and waited in place.
It's not that we're not producing willow branches; it's that nobody understands air fryers.
Despite the plastic casing from Chicheng, Jiangcheng's control electronics were already in place.
However, people still don't understand how it's produced or what the production process is.
We can only wait until Wu Changfeng returns before discussing this further.
Wu Changfeng clapped his hands to attract the workers' attention: "Listen to me, you are all veteran workers. The air fryer that we are launching this time is not very complicated. In terms of process requirements, it is even lower than that of an electric toothbrush."
"The only thing to pay attention to is quality inspection. When inspecting products, you must follow one rule: do not touch the product with your hands immediately after inspection, as it is very hot."
"Alright, everyone look over here. I'm going to teach you how to assemble it."
The workers looked at it very carefully.
Some even brought small notebooks to take notes.
Air fryers don't come with many accessories.
The main components include the power cord, fan, heating rod, tray, lower casing, upper casing, electronic control components, multiple buttons, timer, display, etc.
All that's left are screws and wires.
Wu Changfeng began assembling the equipment.
This was not difficult for Wu Changfeng.
In later generations, although he did not benefit from this wave of advantages.
But Wu Changfeng also disassembled this thing.
It couldn't be simpler.
Wu Changfeng's hands flew, and the parts on the table gradually decreased.
Half an hour later.
An air fryer has been assembled.
The exterior features a matte black finish, and the assembly process ensures the colors match perfectly.
Of course, Wu Changfeng prepared two colors, one black and one white.
The workers found it fascinating.
Although this thing was very simple for Wu Changfeng.
But for the workers who were seeing it for the first time, they were still in a state of confusion.
A female worker raised her hand: "Boss, how do you install ribbon cables? You're too fast, I didn't remember."
Wu Changfeng asked with a smile, "What's your name?"
"Zhang Liaoliao."
Wu Changfeng almost fell to the ground. So you're Lin Xiaotong's boyfriend?
Wu Changfeng took a closer look. He was... only passable.
It's far inferior to willow branches in both appearance and temperament.
Zhang Liao tidied herself up, puzzled, and quietly asked someone, "Is there something on my face? Why does the boss keep staring at me?"
Other workers joked, "He's got his eye on you, why don't you give him a flirty wink?"
Zhang Liao reached out and slapped him: "I have a boyfriend."
Liu Tiao nudged Wu Changfeng from the side: "What are you looking at? Someone is asking you something."
Wu Changfeng said "Oh" a few times: "I was distracted. Um, let me take it apart and demonstrate it again."
After Wu Changfeng disassembled the air fryer.
Pointing to the electronic components, he said, "These are control components. There are quite a lot of wires here, but you need to remember one key point: the wires on the buttons, you need to know what they control."
“First, take this wire, for example.” Wu Changfeng pulled out a wire end and continued, “This is the wire from the button. You need to find the first wire strip on the control panel, insert it, and then tighten the fixing screw.”
"The control panel has the following wire holes: French fries, chicken wings, egg tarts, sweet potatoes, steaks, shrimp cakes, kebabs, as well as switches, temperature increase, temperature decrease, time increase, time decrease, timer, auto-control, and a display."
The workers were completely dumbfounded.
"I didn't realize there were so many parts when I watched the boss assemble it!"
"Damn, who memorized this? Quick, copy it down for me."
"There's just too much stuff on the board, I'm done."
"My head hurts a little."
"I didn't memorize this much stuff when I was in school."
Wu Changfeng watched the workers chattering and laughed, "Don't rush, practice makes perfect."
"Once you get the hang of it, your muscles will instinctively tell you which wire to insert into the hole on the wire board."
"Here, I want to remind you and the quality control staff to make sure you plug in the wires carefully."
"Because the time settings for frying French fries and roasting chicken wings are completely different, plugging in the wrong wire can easily cause the food to burn or remain undercooked."
The workers below nodded earnestly.
"Alright." Wu Changfeng clapped his hands. "Now everyone, let's start trying to produce. Team leaders, take your people to the production line. I'll stay with you."
quite a while.
The workers are ready to take their positions.
Each person had parts at hand and began production.
Wu Changfeng kept correcting the workers' operational errors: "The circuit board needs to be fixed properly. Didn't you see that you missed screwing in one?"
"The monitor is overturned! The 6 has become a 9! Look at the arrow, yes, the arrow is pointing downwards."
"If the tray can't be put in and is forced in, it's ruined."
"Watch out for the screwdriver! Don't scratch the paint."
"The wire ends were cut too long, the copper wires are showing, cut them shorter."
"It's too short! Will it even fit?"
"Oh my god, the switch button is at the bottom right. If you have the strength in your right hand, who will press the switch with their left hand?"
"The buttons on the panel must be arranged the same way. Look at the panels you two made; they have two different arrangements. Take them apart and redo them!"
"The first hole on the circuit board is for French fries, how did you manage to install the timer cable there?"
"What's wrong with this power cord? It's only 30 centimeters long? How can it even reach the socket? It needs to be over 130 centimeters! It depends on the manufacturing requirements!"
This chapter is not finished, please click the next page to continue reading!
Continue read on readnovelmtl.com
