I've never heard of an electronic lawyer before, but they have a way of doing things. They grit their teeth and search for various references and legal basis.
They actually managed to find a few cases that were from the United States, and even the Japanese had to grit their teeth and accept the laws from their godfather's side.
With the equipment installation almost complete, Xing Baohua found an excuse to hold a meeting and work on documents.
After the equipment arrived, we gave a pep talk before starting the machine, explaining to the Japanese employees the importance of quality, precision, efficiency, and yield.
Another day of rambling, nonsensical meetings. In the evening, all employees were told to go home and get some rest, as overtime might be necessary later, so they needed to get adequate rest.
Perhaps because of a single sentence about working overtime, a small number of the employees below were dissatisfied.
The issue isn't whether or not overtime pay is given, but whether or not people are willing to work overtime.
Xing Baohua didn't care. If he had cared about these things, he would have lost completely.
Xing Baohua had a lot of documents to process on his desk, so he told the executives to leave first, as he needed to handle the paperwork.
The factory director and deputy director also advised Xing Baohua to take care of his health and not to overwork himself.
Aside from the security guards at the gate, there are only three Chinese nationals in the entire factory.
At 11 p.m., the three arrived at the most expensive five-axis linkage unit. Xing Baohua ordered them to disassemble it. Niu Jishan and Xu Shuai started working. Niu Jishan drove to turn on the workshop headlights, while Xu Shuai said a flashlight would suffice.
Niu Jishan said, "You can see clearly with the lights on, don't worry! The gatekeeper will sleep soundly tonight."
The Japanese have one advantage: tranquilizers and similar drugs are readily available, and they can also get their hands on stronger narcotics. Otherwise, the groping and stalking incidents wouldn't be so popular!
Niu Jishan plays the role of the chairman's bodyguard. He grinds the medicine that Xing Baohua obtained into powder and puts it in a cigarette.
Around 8 or 9 p.m., Niu Jishan came out on patrol and greeted the gatekeeper, saying a few words, though it's unclear whether the gatekeeper understood him. He politely offered the gatekeeper a cigarette.
The three of them quickly got to work, cooperating seamlessly. Wherever Xing Baohua directed, the other two would dismantle it. Xu Shuai was the one who actually did the work; this kid usually did disassembly and tampering.
After removing the motherboard and seeing the numerous chips on it, Xing Baohua took out his camera and started taking pictures.
They filmed it repeatedly.
Next, we started to locate the memory storing the data, first measuring the voltage, then starting the blow welding and disassembly of the parts, and importing the data.
Import the data into a 10MB hard drive and save it, then save the data using various other methods later.
More than ten million US dollars were spent just for the data in these machines.
If the G family really gives him a gold medal the size of a pancake, Xing Baohua will donate it free of charge.
Unfortunately, Xing Baohua lacked that selfless spirit; he always wanted to take advantage of everyone, even the G family, and would still ask for some benefit.
The process was streamlined. Xu Shuai was responsible for tightening screws and disassembling the casing. Xing Baohua was responsible for taking photos to locate and remove the main chips, while Niu Jishan watched and memorized the details. Finally, the removed chips were soldered back on.
Three units were set up in one night.
Nine machine tools have been imported in total; the rest will be dealt with when we have time. Right now, the data for the most valuable linkage axes has been copied.
The motherboard photos were taken repeatedly on several rolls for easier reverse engineering later.
Enlarging the photo reveals the components and the pathways of the various circuits.
This is much simpler than reverse engineering; isn't it just copying the example?
Xing Baohua hadn't slept all night. He asked Niu Jishan to take the data back to the hotel to rest, while Xu Shuai stayed up with Xing Baohua to continue working.
The workers were punctual and had a good work attitude when they went to work the next day.
Four out of the nine machines were running.
As for the other machines, they are not needed for the time being. Xing Baohua's order volume is not large, and four machines are sufficient.
Xing Baohua and Xu Shuai took a nap in the office in the morning. In the afternoon, Xing Baohua went to the workshop to check on the products being produced.
The technology is good; the factory manager is overseeing things in the workshop. He has very strict quality requirements.
Upon seeing Xing Baohua arrive, he ran over like a lackey, bowing and scraping, saying: "You've worked hard."
Xing Baohua nodded to him, referring to the products produced in the past.
One-piece molding is beautiful, and one has to admire the Japanese for their expertise in mechanical research and development.
After looking at several samples, I even took out calipers to measure them myself, and they all met the standards.
Satisfied, Xing Baohua returned to his office.
Production is not large, so there is no need for workers to work overtime or even in two or three shifts.
Perhaps there will be another chance to dismantle two or three more machine tools tonight.
It's not good to stay in the office any longer, so I left by car after get off work.
In Kanagawa, Xing Baohua didn't rent a house but booked a room in a hotel.
When I got back to the hotel, I went to check the next room to see if Niu Jishan was still working.
He also told Xu Shuai to catch up on his sleep and continue working tonight.
When I got off work, I saw that the security guard who was taking over the night shift was still drowsy.
Xing Baohua knew he still had a chance. He just had some doubts about whether Niu Jishan had overstated the production volume.
Forget it, Xing Baohua didn't care about the lives or deaths of the Japanese devils; he only cared about the data.
As the car drove past the processing plant, Niu Jishan crouched down and walked over to the gatekeeper, peeking slightly into his direction.
I saw the gatekeeper sitting in a chair, dozing off.
Niu Jishan waved to Xing Baohua and the others, signaling them to come over.
Since they couldn't use the main gate, they had to climb over the wall. There was a lot of stuff, so Xu Shuai was the first to climb over. Xing Baohua then threw over some tools and equipment.
Niu Jishan and Xu Shuai ran back and forth across the wall twice to retrieve equipment before Xing Baohua finally climbed over the wall and came in.
The Japanese soldiers' walls were probably about the same height as them, not very high.
Xing Baohua and Xu Shuai were very skilled at scaling the wall of the machinery factory; besides, that wall was incredibly high!
My dear reader, there's more to this chapter! Please click the next page to continue reading—even more exciting content awaits!
Continue read on readnovelmtl.com
