In today's world industry, the mechanical processing industries in developed Western countries and some Eastern European countries such as the Soviet Union have already used four-axis and five-axis linkage machine tools.
Countries like the Soviet Union and Japan now have nine-axis five-axis machine tools, but China is being blocked from buying a five-axis five-axis machine tool.
Wan Feng sighed. It was conceivable that even if the Chinese had to swallow their anger in the face of the other party's exorbitant price, the other party would still not sell it to you.
It is said that technology must be mastered in one's own hands. I am not afraid even if it is not as advanced as yours. At least I have it, and I can stand up straight and not piss on you.
Although the technology he had was Soviet technology, which Western countries ostensibly looked down upon.
Is the Soviet Union's technology backward?
In fact, in terms of machine tools, the Soviet Union's technology was not inferior to that of Western countries. This was because their own technology was not weak, and was not useless as reported by the media later.
After the end of the Cold War, the Western media, which held the world's discourse power, were too busy to discredit the Soviet Union and the subsequent Russian screws, let alone report objectively.
Everything about the Soviet Union was distorted and slandered, including all kinds of technology.
Coupled with their own carelessness, the Soviet machine tool technology was artificially buried.
The Soviets did not develop machine tools in isolation. In addition to their own technology, they imported many advanced machine tools from Italy and Switzerland.
Far more than the five machine tools purchased from Toshiba.
But if others sell it, nothing will happen, but if Toshiba sells it, it will be in big trouble.
Even if they are in the same Western camp, they are not treated the same.
The machine tool that Toshiba sold to the Soviet Union in 1983 was a nine-axis CNC machine tool, which was a key equipment for processing the seven-blade large-skew propellers of strategic nuclear submarines.
The Soviet Union at that time was not without this type of machine tool equipment. Without it, it would not have been able to produce the seven-blade large skew propeller for nuclear submarines so early.
It’s just that the processing precision is not enough, which causes the propeller to make too much noise.
This has to do with the character of their nation and has a lot to do with the DNA in their blood.
It's not just the Soviet Union, the United States is actually the same.
Everyone likes things that are bigger, thicker and more powerful.
Therefore, both the Soviet Union and the United States have a lot of thick, big and stupid things.
The two countries have similarities in industrial manufacturing, which is that they just produce the products and then leave them alone.
They were responsible for inventing, but were too lazy to process the products after they were invented. Riben and Deguo took over the technology and were responsible for meticulously crafting these things.
Later, the inventor's products were not as good as those of the later improvers.
Because of this, Wan Feng did not think that the Soviet machine tools he obtained were very backward. Even if they were backward, they were only defective in the degree of workmanship.
When it comes to meticulous craftsmanship, the Chinese are no worse than the stupid Japanese. If they can do it well, the Chinese can do it too.
If the nation had flaws, China would not have completed the 300-year journey of Western developed countries in just 70 years.
There was a delay of ten years.
"Mr. Li! What are the two machine tools we are promoting now?" Wan Feng called Li Da over.
"Both of these machine tools are the most advanced ones produced by the Leningrad Machine Tool Plant. One is a 2C42-65 eight-axis four-link CNC machine tool, which uses the MS1201 microprocessor and is used for drilling, milling and boring."
Li Da only mentioned one type and did not mention the other one.
Even so, Zhu Guoxiong was already quite surprised.
"Are you working on an eight-axis four-axis machine tool?!"
Where can we find justice in this?
The national military-industrial unit used the guise of a civilian company to buy five-axis linkage machine tools from foreigners, but they were so humble that they refused to sell to them.
However, an unknown small factory in this small mountain valley is secretly developing an eight-axis four-axis machine tool.
"So you have now produced a five-axis, five-axis machine tool?"
Wan Feng turned to Li Da. He was not very clear about the exact information of the lathe, but he knew that it was definitely in production.
"We haven't officially started production yet, we've only produced a few prototypes."
"Prototype? Is it in use?"
"There are two in use in the machining center, and they have been used for several months."
"It's been used for several months? Why don't you put it into production?"
"What's the hurry?" Wan Feng replied casually.
It's bad! His words "Why are you so anxious?" made Zhu Guoxiong very angry.
"Where's my gun? I have to kill this little bastard." Zhu Guoxiong reached out and touched his body randomly.
Wan Feng broke out in a cold sweat.
Holy shit! Oh my god! I told you there was no rush and you pulled out a gun?
If he really pulls out a gun, should I run away?
Zhu Guoxiong didn't take out a gun, but he took out a cigarette.
"Do you know how many military factories need machine tools like this? Aren't you in a hurry?"
"Grandpa! Didn't your military tell me about this? Besides, even though we've made five-axis and six-axis machine tools, their stability, accuracy, and durability still need to be tested in actual combat. Otherwise, it would be irresponsible to just push them onto the market!"
Wan Feng was very tactful and lit a cigarette for Zhu Guoxiong.
He really wanted to burn Zhu Guoxiong's beard with his hands. This old thief was really unreasonable. He actually used a gun to scare him.
But in the end I just thought about it and didn’t dare!
This explanation is very reasonable, Zhu Guoxiong nodded.
"We want to be a century-old enterprise, but we don't plan to start a business today and fail tomorrow. Therefore, the quality must be up to standard. Even if we can't reach the international advanced level, we can't be much worse than them."
"That makes sense. Take me to your processing workshop to have a look."
Entering the workshop, Li Da introduced the machine tools: "The machine tools used in this workshop are all copied from the Soviet Union. However, we have improved the flaws left by the Soviets' carelessness, and now the precision of these machine tools is much higher than before."
Zhu Guoxiong carefully observed these machine tools. He was also a technician and was not unfamiliar with these things.
Sure enough, I found that the machine tools used in this workshop are very different from those traditional machine tools in China, with obvious differences in style and operation.
Li Da led Zhu Guoxiong to a five-axis lathe.
"Originally, there were two five-axis machine tools in operation in this workshop, producing core components for motorcycle engines. However, one of them got married and took wedding leave two days ago, so only this one machine tool is running."
The operator of the machine tool is a young man of about 25 or 26 years old. His job is very easy. When a component is processed, he just needs to install the blank on the workbench and start the machine tool.
The rest is up to the machine tool itself.
Cutting, drilling, boring and milling, after each process, it only takes a few minutes to produce a very delicate component.
Seeing all this, Zhu Guoxiong took a deep breath.
Continue read on readnovelmtl.com
