At this moment, Long Dingkun anxiously called Long Kui and her two sisters. Now he just wanted to apologize to the three children and ask for their help.

The three Longkui sisters simply ignored his calls.

The three Long Kui sisters didn't expect that just a press conference and a live broadcast by their brother would cause such a huge blow to the Long family.

Long Dingkun wanted to go there in person at this moment, but at this moment the national media and attention were all focused on his Long family.

Moreover, the Long family has now suffered a series of blows, and competitors have taken the opportunity to add insult to injury.

Long Dingkun could only ask for help from Long Huijuan in the universe, and let his daughter go to see Long Fei and persuade Long Fei to help the Long family.

Long Huijuan understood that the family was hit hard at this time. Long Huijuan tried to contact her nephew, hoping that he could help the Long family.

Long Fei refused directly and made his attitude clear to his aunt, "Now I am just asking for interest from the Long family. Tell Long Dingkun that I still remember the revenge for humiliating my mother. Let Long Dingkun enjoy his last glory in the next few years. From now on, I will make him and his sons and grandsons sleep on the street."

"Also warn him that if he dares to touch my three sisters, I will make him wish he were dead."

Long Huijuan could only sigh and tell her father the truth.

Long Dingkun regretted very much why he humiliated Wu Qian back then.

At this time, Shu Tielong called Long Dingkun.

"Brother Shu, I wonder what you need help with? I will definitely do it for you." Long Dingkun tried his best to please Shu Tielong in his tone.

Shu Tielong on the phone said disapprovingly: "Brother Long, I came here just to give you a piece of advice, don't touch Long Fei's sisters."

"Brother Shu, what are you talking about? They are my grandchildren, how could I possibly touch them?"

"Humph, you won't, but can you guarantee that your descendants won't?"

Long Dingkun was speechless for a moment.

Shu Tielong continued, "Mr. Long, I must give you a piece of advice now. His Majesty the Emperor wants to call Long Fei back, so nothing unexpected can happen at this time. Otherwise, your Long family will be held responsible.

Shu Tielong hung up the phone after he finished speaking.

Long Dingkun immediately issued an order, forbidding anyone to touch Long Fei's three sisters, and sent people to secretly protect Long Kui and her three sisters.

…

On the other hand, ever since Long Fei shared Xien MS and the things he designed and wrote when he was a child in the live broadcast.

At this moment, Long Fei is preparing to upgrade the Jim II, although the performance of the Xien MS is not as good as the Jim II in all aspects.

However, if many countries can develop Keen MS, the Tianyi Mercenary Group's MS advantage over these countries will be weakened.

Long Fei decided to upgrade the GM II MS first so that the Tianyi Mercenary Group could continue to maintain its great advantage.

At the beginning, Long Fei wanted to use the GM III MS to replace the GM II, but after thinking about it, he realized that the advantage gained by replacing the GM III MS might not be as great as before.

Then, Long Fei took out the design drawings of the Jegan MS and the GM III for comparison.

After comparing the two.

The biggest feature of the Jegan is the large backpack, which greatly increases the endurance of the machine. The upper sides of the backpack are equipped with movable cantilevers similar to the Gundam Mk-II and GM III, and the shoulder side is equipped with a large thrust nozzle to improve the lateral acceleration ability.

The GM III is superior to the Jegan MS in terms of armor protection, but is inferior to the Jegan MS in other aspects such as engines and detectors.

The Jegan MS armor is a new type of titanium alloy ceramic composite armor. There is no problem at all in manufacturing this new type of armor.

Moreover, its defensive power surpasses that of the original Rx78 and the first generation of the Gp series Gundamium alloy.

The Gundam armor that is still in service now includes phase shift armor, E-carbon armor, nanolayer armor and Gundamnium alloy.

The above types of armor each have their own merits and advantages.

Not only is the E-carbon armor more defensive than the first-generation Gundam alloy, it's even slightly inferior to the second-generation Gundam alloy developed by Long Fei.

It was not until the third generation of Gundamium alloy was developed that its defense and toughness surpassed E-carbon armor.

However, in terms of weight, E carbon armor is lighter.

Gundams like the Z Gundam and the Astray Gundam initially used the second-generation Gundam alloy. After the third-generation Gundam alloy was developed, the armor of these Gundams was replaced with the third-generation Gundam alloy.

When the Wing Gundam was being developed, the third-generation Gundam alloy had just been successfully developed, and it was directly used as armor.

According to the original design drawings, part of the armor of the GM III would be made of Gundamium alloy, which greatly increased the cost, manufacturing time and mass production quantity.

As for the armor of Jegan MS.

The new titanium alloy ceramic composite armor is slightly inferior to the second-generation Gundam alloy in terms of defensive power, but it is lighter in weight, most of the required materials are common, and it takes less time and cost to manufacture.

Long Fei replaced the armor of the simulated Jim III with a new titanium alloy ceramic composite armor. Although the manufacturing mass production was greatly improved, the time and cost required also decreased a lot.

However, this will cause the defense capability of the GM III to decline, and the manufacturing cost is still slightly higher than that of the Jegan MS.

If we simulate the calculation based on the same production line, the production quantities of the two will be similar.

The Jegan MS simulation makes its propulsion force and acceleration equal to that of the GM III. Although the cost is higher, it is still slightly lower than the GM III.

The two sides conducted several rounds of simulated battles, and Jegan MS gained the advantage and won every round of simulated battles.

Long Fei decided to directly use the Jegan MS to replace the GM II as the standard equipment for the next MS.

Then, Long Fei made some modifications to the Jegan MS so that it could mount some weapons. In this way, the derivative models in the original work could appear as long as they mounted weapons, and as long as a layer of anti-beam coating was applied, it would have the same armor effect as the various series of Dagger MS.

Then, Long Fei handed the revised design drawings of the Jegan MS to Commander-in-Chief Li Jiaming.

Commander-in-Chief Li Jiaming immediately designated a production line as the advance production line for the Jegan MS, and then put the earliest produced Jegan MS into actual combat after a round of testing.

Let's see if it can really replace the Jim II.

The development of Gundam Exia is almost coming to an end.

Many countries in the 6th zone colony are still in the midst of war. Those who can escape either flee to outside the colony and outside the Earth, or flee to the colonial satellites where the Tianyi Mercenary Corps has a branch base or to the surrounding colonial satellites.

The people who cannot escape can only pray for the country to win, or after the country is defeated, pray that the occupying country will treat them, the people of the defeated country, well.