The Black Rabbit Force, which serves as the TR series' actual combat verification platform, now dispatched other TR series machines to attack.

The Sniper GM III has a long-range beam rifle and a high-precision optical sensor.

The RGM-79SR Sniper Type GM III is an improvement on the RGM-79CR GM High Mobility Type. It is actually different from the RGM-86R GM III. In fact, according to the original work, the latter is actually the successor of the former.

Dr. Cordelia, the head of the TR series, had just started researching the RGM-79CR GM Kai High Mobility Type as a test machine to collect relevant data, and Dr. Cordelia conducted research on this.

When Dr. Cordelia was researching the GM High Mobility Type, she evaluated it as an excellent machine compared to other countries, but very backward in the Skywing Mercenary Group, even inferior to the GM II.

Then, Dr. Cordelia commented that there was no need to develop and verify the Sniper GM III, Sniper GM III High Mobility Type, and Sniper GM III Medium Range Support Type.

Because, at that time, the Tianyi Mercenary Group had already served Jegan, and Dr. Cordelia discussed this matter with Long Fei and said that there was no need for research.

Then, after Long Fei took out the design drawing of RGM-86R GM III, Dr. Cordelia changed her mind and studied the three GM models of the TR series with the RGM-86R GM III, and integrated the technology of the three GM models with the RGM-86R GM III.

The three GM models directly adopt the back and leg jet packs and thrusters of GM III, and at the same time adopt the new Minovsky super-energy thermonuclear reactor III mass production type, which greatly improves the excitement and output.

The sniper type GM III can also use a variety of weapons.

Several sniper-type GM IIIs use long-range beam rifles and high-precision optical sensors to lock targets with high precision and snipe targets from a long distance.

One of the Blood Reds piloted by the Adjuster was shot out by the Sniper GM III using a long-range beam rifle.

Some sniper-type GM IIIs also used triple missile launchers to fire at the two Emerald Holy Machines.

The two pilots of the Emerald Holy Machines used their mental powers to control the floaters, but they were not in good enough condition to shoot down all of the dozen missiles. The beams fired by the floaters even deviated and passed directly past the missiles.

Although the two Emerald Holy Machine pilots quickly took remedial measures and used their two-handed beam guns for point defense, and finally shot down the remaining incoming missiles, they were not in good condition and could not sense the sniper beams coming towards them. The two sniper beams directly penetrated the two Emerald Holy Machines.

If the pilots of the two Emerald Holy Machines were in good condition, it would be difficult for the Sniper GM III pilots who were sniping at them to hit them, even if they were elite pilots.

A Sniper-Type Jim III High Mobility Type backpack thruster is slightly larger than the other two. The waist armor also has thrusters, and its high mobility is better than the other two. With its high mobility, it repeatedly dodged the attacks of an Azure Holy Machine (piloted by a former colonial resident because of some military merits).

The Sniper-Type GM III High Mobility Type wields a specially developed beam sniper rifle with two hands. Although the sniping range is not as good as the long-range sniper beam rifle, it can now switch to rifle mode and shoot down Azure in rifle mode.

Then, the rifle mode was switched to sniper mode, and fire was opened at the enemy aircraft at a distance.

"Wow, the shooting interval is even shorter than that of a long-range beam sniper rifle." The driver said while pressing a button while shooting at the target through the sniper sight.

The sniper-type GM III high-mobility model can also use other weapons. Many Black Rabbit members pilot this GM III. In addition to using the above weapons, it is also equipped with other medium-range weapons, using its high mobility to shoot down many target machines in succession.

"The reaction speed and enemy lock-on speed are faster than the other two models!" said the Sniper-Type GM III High Mobility Type.

In addition to the long-range sniper beam gun, the Sniper GM III Medium-Range Support Type can also use a 240mm cannon for medium-range bombing to cover the operations of other machines. Of course, it can also use a variety of weapons.

A sniper-type GM III medium-range support type used a 240mm cannon to fire continuously and blasted an armored monster into pieces.

Although Dr. Cordelia modified and upgraded the machine, the 240mm cannon still caused a decrease in the balance and maneuverability of the machine.

"After firing the 240mm cannon, the balance of the fuselage is bad. The whole fuselage will vibrate. If it fires continuously, the whole fuselage will sway unsteadily." A pilot complained.

Although the pilot blasted the target into pieces, the continuous firing caused the machine to swing involuntarily.

"Hey, new guy, don't complain. Yours is already an improved version. I've flown earlier ones with more problems. Stability and balance were worse. If you fire a 240mm cannon, the whole machine might be moved to another place."

Among the three Jim III models, the mid-range support type Black Rabbit was rated the lowest by most members, while the high-mobility type was rated the highest.

After a series of modifications and upgrades by Dr. Cordelia, the three GM IIIs have better overall performance than the RGM-86R GM III, and are even better than the previous Kira Doga. They are also stronger than the Jegan with special specification parts currently in service.

In addition to studying various types of Gundam, the TR series research team also has different machines, such as the RGM-79 GM III series. In fact, the High Zaku also had its design drawings to study.

It was just that the Ou Ya Cross Country had already chosen the designed Gozaku.

The TR series' High Zaku and its various forms only remain in the design drawings, without any further improved designs.

In addition to the RGM-79 GM III series, there is also a machine called the RX-107 Rosette, which is known as the successor to the High Zaku.

Many Black Rabbit members rated this machine as having better performance than the Marasai, which is nominally the successor to the High Zaku.

After Dr. Cordelia and his team made some improvements to the machine, Rosette's overall performance was even higher than the original blueprint data.

Except for the lack of long-range sniper weapons, Roset has good combat efficiency in medium-range combat and hand-to-hand combat.

Rosette's performance is no less than those three GM IIIs, but the two machines have different positioning. Moreover, Rosette also has an enhanced land combat type, which will be deployed during ground suppression.

In addition to the Rosette enhanced land combat type, there is another model, the TR-4 Dandilane, which will also be put into actual combat testing during ground suppression warfare.

Many members of the Black Rabbit Force used to joke about themselves that in addition to being the assassination team within the boss' dark side force, they were also testers who put newly developed weapons into actual combat tests.

A member of the Black Rabbit Division once estimated that these two Ms models might be licensed to Tianyi Arms Manufacturing Company for production and sale in the future.

Suddenly, several huge mobile fortresses passed by not far from the GM III and Rosette.