Xiao Yi also organized a special team to research how to better harvest and utilize the energy generated within the base. Xiao Yi sat at the head of the conference room with a focused expression, his table before him covered with various documents and blueprints. His gaze swept over each member present, and he declared firmly, "We must find the most effective way to fully utilize every bit of energy within the base." At his call, an elite team of experts from various fields quickly assembled. They included scholars versed in physics, experienced engineers, and professionals with in-depth knowledge of energy management. At the team's first meeting, everyone presented their ideas. Physicists proposed using the latest energy conversion principles to maximize the conversion of kinetic energy generated by the base's machinery into electrical energy. Engineers, based on the base's actual layout, devised efficient energy transmission lines to minimize energy loss during transmission. To obtain accurate data, the team conducted on-site inspections of every corner of the base. They recorded the operating parameters of each device and analyzed the characteristics and patterns of its energy output. In the laboratory, various experimental equipment operated day and night. Researchers continuously experimented with different materials and technologies, striving to develop a more efficient energy harvesting device. They often sit together and have heated discussions on complex calculation results and experimental data. Sometimes they argue fiercely over a difference of opinion, but this is all for the purpose of finding the most perfect solution. After countless failures and attempts, the team gradually made some breakthroughs. The prototype of the new energy harvesting device gradually became clear on the drawings, and the energy utilization plan was constantly improved and optimized. Xiao Yi always paid close attention to the research progress of the team, organized regular meetings to listen to reports, and gave them full support and encouragement. Thanks to the unremitting efforts of this dedicated team, the collection and utilization of energy in the base ushered in new hope.
They installed solar panels and wind turbines. While their efficiency was low in the cold, every bit of energy collected was crucial for heating the base. In the open air of the base, workers braved the chilly wind and labored to install the panels and wind turbines. Each solar panel, mounted on a specially designed support, looked lonely in the pale sunlight. Due to the cold climate, the sunlight was weak, significantly reducing the panels' efficiency. However, every tiny bit of electricity generated was considered a precious energy source. The wind turbine's massive blades slowly turned in the wind, emitting a low hum. The howling, shifting, and erratic wind caused the turbine's operation to be intermittent. However, even the electricity generated by even a brief rotation could contribute to the base's heating system. To protect these devices from the harsh environment, workers coated the solar panels with a special protective coating to reduce ice and snow accumulation and damage. Key components of the wind turbine were also insulated and protected to minimize the impact of low temperatures on their performance. The staff responsible for monitoring energy collection keep a close eye on the dashboard, recording every bit of energy generated. Even the slightest change in the value brings them a sense of comfort and encouragement. Inside the base's control room, a large screen displays the operating status of the solar panels and wind turbines, along with energy collection data. Based on this data, technicians continuously adjust the system's operating parameters, optimizing energy storage and distribution. Although the efficiency of the solar panels and wind turbines is not ideal in this frigid environment, every bit of collected energy is like a spark, bringing hope to the base's heating system. They symbolize the people's unremitting efforts and the determination and courage to survive under difficult conditions.
As the defense works gradually completed, various testing equipment was put into operation. Trucks laden with testing equipment slowly rolled into the base, and workers quickly and carefully unloaded the delicate instruments. Cranes lifted massive sensors and precisely installed them in their designated locations. Technicians carefully placed small, sensitive detectors in strategic locations. Rows of high-definition cameras stood around the perimeter of the defenses, like vigilant eyes, constantly monitoring every movement. These cameras, equipped with powerful zoom and night vision capabilities, captured every detail, from the subtlest changes during the day to the darkest corners of the night. Advanced radar systems also began operating, continuously transmitting and receiving electromagnetic waves. The massive radar antenna slowly rotated, scanning the sky for any suspicious targets. In the control room, screens displayed images of radar echoes, and technicians kept a close eye on them, alert to any unusual signals. Air quality monitors were stationed throughout the area, providing real-time measurements of air pollutants, humidity, temperature, and other parameters. They could quickly detect any gas components that could pose a threat to human health and issue timely alerts. Sound detection equipment is also cleverly placed in key locations, capable of capturing the slightest sound changes. Even the slightest footsteps or the movement of objects from a distance can be keenly perceived. At the same time, a series of equipment for detecting geological activities, radiation levels, and electromagnetic interference has also been put into use. These devices provide all-round monitoring and early warning for defense projects through complex sensors and sophisticated analysis systems. Technicians are busy shuttling between various
Engineers closely monitor heat distribution and dissipation, continuously adjusting and optimizing the defense facilities based on the data. In a monitoring room filled with high-tech equipment, the engineers stare intently at the constantly flashing numbers and images on a large screen. These data and images provide a real-time snapshot of the facility's heat distribution and dissipation, and every subtle change weighs heavily on their minds. Their eyes are glued to the screen, not missing a single unusual fluctuation. They quickly jot down key data in their notebooks, mumbling to themselves as they calculate heat flow trends. If they discover uneven heat distribution or excessive heat dissipation in a particular area, the engineers immediately engage in discussion. They gather together, passionately debating data and drawings, trying to identify the root cause and the best solution. Once they decide on an adjustment plan, they quickly spring into action. Some engineers remotely control equipment via computer systems, adjusting the airflow and temperature of ventilation ducts; others physically inspect the insulation and replace or repair any damaged or deteriorating components. Inside the defense facility, the busy figures of engineers scurry about. Armed with specialized testing equipment, they meticulously measured and analyzed every detail to ensure the effectiveness of their adjustments. After a period of monitoring and adjustments, they reviewed the data again, their faces filled with gratified smiles. But they dared not let their guard down for even a moment, continuing to closely monitor thermal fluctuations. They knew that only through continuous optimization could the defense facilities maintain optimal performance in such extreme conditions. Thus, day after day, the engineers persevered at their posts, applying their expertise and rigorous approach to tirelessly striving to improve and optimize the defense facilities.
This chapter is not over yet, please click on the next page to continue reading!
Continue read on readnovelmtl.com
